Our first Prestige Series amplifier is the Concero Direct Heated Tube Monoblock amplifier.
Using top of the line design, material and building techniques, we have managed to get pretty close to our Reference line amplifier performance, but in a more manageable design,as regards funds and size.
We endeavoured to produce a design that has all the sonic virtues of only the best of the best Single Ended amplifiers, but with absolutely none of their shortcomings. We strongly believe we have succeeded .
Driving the output tube, is a major task, which almost all SET amplifiers fell short, using tubes not adequate to the task. Tubes with high Rp and small current swing capabilities. What we choose to use is a small amp ,consisting of the special quality Siemens E280F super-tube, with it’s own power and bias supply.
This ultra wide-bandwidth/ very high trans-conductance tube is transformer coupled to the grid of the output tube using a very wide-bandwidth inter-stage transformer. No RC coupling is used in any of our amplifiers.
Output is rated @ 30W, via a massive output transformer, with 4 and 8 ohm taps.
The output transformer weighs more than many SET amplifier's total weight. The highest quality massive core of the output transformer used in the design, is mandatory for delivering true undistorted higher and lower bass, and driving any speaker through complex musical content. Many SET amplifiers get distortion when driving speakers with complex music, because of core saturation. Our output transformer can easily take 60W at 20Hz ,so at 25W intermodulation aftifacts are next to zero.
Separate power supplies are used throughout our design, using 4 toroidal transformers rated at over 1100VA total. Separate toroidals are used for driver stage, output stage ,filaments and bias circuits.
Driver and output is ground-choke regulated and energy banks are over 4000 joule per channel.
• Full Power sensitivity: 1Vrms
• Noise floor: <-100db A-weighted
• THD: < -70db @ 60% Full power
• Power Bandwidth: 15Hz ~ 80Khz -3db @ 25W
• Tube list: 1x RCA 813, 1x Siemens E280F
• Power Consumption @ idle: 250W
Dimensions: 560 mm W x 420 mm D x 390 mm H
Weight is 70Kg each, unpacked.
Nintronics offers generous trade in prices to help make your next upgrade as seamless as possible, while greatly reducing the overall price of your purchase. Depending upon the items involved, Nintronics will be happy to send out one of our nationwide installation engineers to collect your traded in items and unbox, setup and calibrate your new equipment.
We offer FREE delivery to the mainland UK (excluding Channel Islands, Isle of Man, Isle of White, Isles of Scilly, and some of the remote Scottish Isles).
For other areas please contact us for a quote. Select items can be delivered internationally by prior agreement. Again please contact us for a quote. We will always do our best to help.
Our aim is to dispatch goods within 2 working days of an order being placed. Please allow 5 working days from the time of your order to receipt of item. If an order is expected to take longer than this our order fulfillment department will contact you to inform you of this.
Where multiple items are ordered, we will dispatch them all in one package. If you have ordered any special or customized items, or items otherwise not immediately available, we will dispatch the order when all items are available. If you have any concerns regarding this, please contact us and we will do are very best to help you.