Audioquest Diamond Oprical Full to Full Size

£419.00
icon

The audio frontier is all abuzz these days with the pleasure possible though HDMI, USB, FireWire® and Ethernet connections. However, these current generation digital technologies are only part of the story, just as the challenge of designing, manufacturing and choosing the best analog interconnects and speaker cables is as important as ever. The S/P-DIF (Sony® Philips Digital InterFace), which arrived in 1983 along with the CD, is still very much a part of our world today. S/P-DIF is transmitted through Digital Coax and Toslink fiber optics (EIA-J), making them still some of the most important cables in

electronic entertainment.

While, thanks to HDMI, Toslink is not so often used to connect a DVD player to an A/V receiver, Toslink connectors are common on cable-boxes, TV sets, subwoofers, all sorts of products. And now, the 3.5mm Mini Optical connector, also somewhat incorrectly known as Mini-Toslink, is everywhere … from the 3.5mm dual-purpose headphone jack on a Mac laptop, to inputs on some of the finest portables.

For these many reasons, AudioQuest has refined and renewed our line of serious high performance OptiLink cables. All models and all lengths are now available Toslink to Toslink and Toslink to 3.5mm Mini Optical.

When the question is “how can a fiber-optic cable change the sound?” … the answer is easier to explain than for almost any other type of cable. If the light source were a coherent laser, firing into a vacuum, all the light would stay straight, arriving at its destination at the same time. Even if the LED light source in a Toslink system were coherent, the light entering a fiber-optic cable is scattered and dispersed by imperfections and impurities in the fiber. This can be measured as a loss of amplitude … but amplitude is not the problem, a 50% true loss would have no effect on sound quality.

The problem is that the dispersed light does get through the cable, but only after it has taken a longer path, like a pool ball bouncing off the side-rails, causing it to arrive later. This delayed part of the signal prevents the computer charged with decoding this information from being able to decode properly, or even at all. The inability to decode shows first at higher frequencies (not audio frequencies, this is a mono stream of digital audio information), so reduced bandwidth is a measurable signature of light being dispersed by a fiber. The punch line: The less dispersion in the fiber, the less distortion in the final analog audio signal presented to our ears.

There is another serious dispersal mechanism in the Toslink system. The fiber is a relatively huge 1.0mm in diameter, and the LED light source is also relatively large, spraying light into the fiber at many different angles. Even if the fiber were absolutely perfect, the signal would be spread across time because light rays entering at different angles take different length paths and arrives with different amounts of delay.

The almost complete solution to this problem is to use hundreds of much smaller fibers in a 1.0mm bundle. Because each fiber is limited as to what angle of input can enter the fiber, there is far less variety, and far less dispersion over time. This narrow-aperture effect is similar to how a pin-hole camera can take a picture without a lens … by letting in light at only a very limited range of angles, a picture can be taken, whereas removing the lens from a wider aperture would make photography impossible. Less light gets through a multi-fiber cable, but the light that does get into the fibers comes out within in a much smaller time-envelope.

So there is one problem, the dispersion of light across time … and two avenues towards a better result: less dispersion in the fiber (better polymers and ultimately quartz), and less dispersion by filtering the input angle. How simple is that! Listen and enjoy.

Specifications

• 280 Narrow-Aperture Quartz (Fused-Silica) Fibers

• Low-Jitter (Digital Timing Errors)

• Precision Polished Fiber Ends

• 3 meter and above In-Wall Rated PVC

Book a Demo - Audioquest Diamond Oprical Full to Full Size

Nintronics offers generous trade in prices to help make your next upgrade as seamless as possible, while greatly reducing the overall price of your purchase. Depending upon the items involved, Nintronics will be happy to send out one of our nationwide installation engineers to collect your traded in items and unbox, setup and calibrate your new equipment.



Trade In - Audioquest Diamond Oprical Full to Full Size
Write Your Own Review
You're reviewing:Audioquest Diamond Oprical Full to Full Size
Your Rating

Products from the same brand

  1. Monitor Audio Apex A10 Bookshelf Speaker
    Monitor Audio Apex A10 Bookshelf Speaker 1 Monitor Audio
    £300.00

    9 years warranty

  2. Monitor Audio A40 Centre Speaker
    Monitor Audio A40 Centre Speaker Monitor Audio
    £500.00

    9 years warranty

  3. Monitor Audio AW12 Subwoofer
    Monitor Audio AW12 Subwoofer Monitor Audio
    £1,000.00
  4. Monitor Audio C165 In-Ceiling Speaker
    Monitor Audio C165 In-Ceiling Speaker Monitor Audio
    £115.00

    9 years warranty

  5. Monitor Audio C165-T2 In-Ceiling Speaker
    Monitor Audio C165-T2 In-Ceiling Speaker Monitor Audio
    £145.00

    9 years warranty

We offer FREE delivery to the mainland UK (excluding Channel Islands, Isle of Man, Isle of White, Isles of Scilly, and some of the remote Scottish Isles).

For other areas please contact us for a quote. Select items can be delivered internationally by prior agreement. Again please contact us for a quote. We will always do our best to help.

Our aim is to dispatch goods within 2 working days of an order being placed. Please allow 5 working days from the time of your order to receipt of item. If an order is expected to take longer than this our order fulfillment department will contact you to inform you of this.

Where multiple items are ordered, we will dispatch them all in one package. If you have ordered any special or customized items, or items otherwise not immediately available, we will dispatch the order when all items are available. If you have any concerns regarding this, please contact us and we will do are very best to help you.