The motorbase on Galder is equipped with a DC tacho motor. Communication between the tacho and the high precision motor control electronic, will keep the platter in a very accurate speed. We measured 0.0027% speed variation!
The power supply for the motor control electronic, is build into in the air supply box, to keep high voltage distant from the inter connects delicate signal transmission. Connection is by a 5 meter shielded cable with LEMO connectors.
The air supply is remote controlled from the motorbase. By pressing ether 33 or 45 rpm, first press the air supply goes “ON”, and second press the platter starts to spin. When turning “OFF” the selected speed, the air supply goes “OFF” automatically after 2 minutes. Very user friendly and convenient.
Bergmann
Bergmann Galder + Odin Gold Edition Turntable
Bergmann Galder + Odin Gold Edition Turntable
Couldn't load pickup availability
- Free Delivery
- Demo Available
- Trade-in Available
Share
Details
Description
Galder Turntable - Bergmann Audio 4-arm turntable, airbearing design
- Galder accept up to 4 tonearms. Radial- and linear tracking arms.
- Output for an airbearing tonearm.
- Motorbase seperated from the plinth.
- Vacuum hold down, or clamp.
Advantage of using air bearings
The platter is centered by a steel spindle, running in a very frictionless, low noise and hard wearing polymeric bearing material, and floats on a thin air cushion, which lower the mechanical bearing noise to an absolute minimum- if any. (A traditional bearing solution, which keep the platter centered AND support the platter weight, makes a higher level of mechanical bearing noise, as the contact point between spindle top and platter, generates a very high pressure – and hereby noise.)
By floating on an air cushion, the platter also gains the advantage of a very good isolation from the surroundings, same way as the known -and very expensive- air supported shelfs, used in many highend audio systems.
Also the speed stability benefit from the air supported platter. The musical flow is really extraordinary – not necessarily measurable but audiable.
Galder
In the Nordic Mythology, Galder means to enchant. A craft consisting of magic songs and spells.
A master of practice Galder craft, was said to be able to raise storms, make distant ships sink, make swords blunt, make armour decide victory or defeat in battles. Odin, a master of magic, was a God with great abilities to “Galdre”.
Plinth - Galder Turntable
The plinth is made of one solid piece of cnc-machined die cast aluminium, as wel as the motorbase. Both parts with powder coated finish. The plinth is securely tightened to a 10mm aluminium bottom plate, which is standing on 3 adjustable feet.
The feet is an aluminium and ceramic ball construction. 3 upper and smaller ceramic balls configured in a triangle, is standing on top of one bigger lower ceramic ball. No matter the feet position, the 3 upper ceramic balls will always have a perfect contact to the lower ceramic ball.
The motor base is standing on the aluminium bottom plate –but decoupled – and will always be aligned with the plinth, no matter the feet position.
On the back side of the plinth, the back panel is mounted. It consist of: Grounding, Air input, Vacuum input, output for an air bearing tonearm, and air adjustment valves for platter and tonearm.
The air supply has been the object of our greatest attention. The goal is to design a silent air supply, which could be placed in the listening room, and deliver an even, clean and dry air flow.
The pump is an oil free, long life unit, which do not require much maintenance.
The impulses from the pump are absorbed in an encapsulated reservoir. This results in an even airflow to the air bearing. The air supply is mounted with a filter, which prevents dust particles in entering the system. This filter is replaceable when necessary.
There are different way to flatten a record, and secure that the record have a good contact to the record mat/platter. A clamp covering the record label, will only keep the center of the record perfectly flattened. A metal ring, on the outer etch will only keep the outer part of the record flattened. The only way to flatten the record completely, is by obtaining a vacuum between the record and the mat/platter – vacuum hold down. The vacuum hold down invented by Bergmann Audio, is the most user friendly system. The vacuum pump – which is in the air supply box – doesn’t need to be turned “OFF”, when changing record. The user simply remove the vacuum clamp that is covering the center spindle, and the vacuum is released, and the record can easily be changed while the platter is still spinning.After changing the record, put back the vacuum clamp, and the record is automatically flattened by the vacuum hold down system.
Odin
In the Nordic Mythology, Odin is an extreme central God. Together with his brothers, he is creator of the world and man. Odin is the wise God. He is also the God of poetry, providing the poets with ecstasy and wisdom to express themselves. As a God of war, Odin also plays his role, and acts more like the strategist, who sets up his army, and as the God who ensures victory.
In the design and construction of Odin, we stay to our idea of simplicity: As few parts and assemblings as possible, to avoid resonances.
A parameter in the ultimate tonearm design is stiffness and stability in the construction. Both are carefully incorporated in the Odin arm. An example is the airpipe, which is fixed in both ends, to give the floating part the best possible base.
The armtube is traditional for Bergmann tonearms- well considered construction in few parts, made as a double tube construction, with damping in between the tubes. This means that the armtube control the vibrations from cartridge and record grooves when handling the musical crescendos.
The tonearm wire is- as usual in Bergmann tonearms- in one piece from cartridge clips to the DIN connector. The DIN connector ensures user flexibility for connection of the prefered interconnect phono cable.
Counterweight is decoupled from the arm- again to avoid any resonances.
The first part of the tonearm to handle modulations from the record groove and cartridge, is the moving part of the tonearm. Head shell, armtube, sliding pipe and counter weight, has to be well considered and well assembled, to avoid any resonances to disturb the delicate signal.
The head shell is a very stiff construction, machined of one solid piece of aluminium, glued by 2-component epoxy onto the seamless carbon fiber armtube, which is a double carbon fiber tube construction with damping in between, to avoid coloration to the sound. The armtube is fixed in a groove, on top of the sliding pipe, which is machined of 2 pieces of solid aluminium and glued by 2-component epoxy.
The space between the airpipe and the sliding pipe, is 50 micron, as we found this as the most userfriendly.
The azimuth adjustment is very well considered – a slot on the bottom side of the head shell, where an “azimuth-plate” perfectly fit = 100% contact, the azimuth is simply adjusted by tighten or untighten the 2 screws holding the cartridge, and then twist the cartridge to a perfect azimuth. At Bergmann Audio, we don’t believe in a twistable head shell in the armtube, as this solution never will be as strong and stiff, as the construction we have made on the Odin tonearm.
The tonearm wire is made in one piece from the cartridge clips to the DIN connector, to secure as pure signal transmission as possible.
- Headshell machined in solid aluminium. The design ensure optimal stiffness.
- Azimuth plate. 100% contact to the headshell and cartridge.
- Armtube is a double seamless carbon design, with damping in between.
- Sliding pipe floats completely frictionsless on the airpipe.
- Tonearm wire in one piece from cartridge clips to the DIN connector.
- Counter weight, decoupled from the armtube by 3 rubber strings.
Specifications
Specifications
Tonearm:
Linear tracking airbearing tonearm.
Aluminium/carbon.
Armtube damped inside.
Counter weight decoupled from armtube.
Adjustments: VTA, overhang, azimuth, leveling. Tracking force.
Wire:
High quality copper litz.
Clips:
Gold plated copper.
Connectors:
DIN.
Effective mass: 14g.
Weight: Incl. armboard, 1.180g.
Armboard:
Aluminium.
Dimension:
70 x 190 x 265mm (H x W x L)
Airsupply:
Silent, clean, dry and smooth airflow. Replaceable dust filter.
Dimensions:
135 x 155 x 330 (H x W x L)
Weight:
5.7kg.
Book a Demo
Book a Demo:
Bergmann Galder + Odin Gold Edition Turntable
Trade in
Trade in form:
Bergmann Galder + Odin Gold Edition Turntable
Reviews
Reviews
Delivery & Returns
Delivery & Returns
We offer FREE delivery to the mainland UK (excluding Channel Islands, Isle of Man, Isle of White, Isles of Scilly, and some of the remote Scottish Isles).
For other areas please contact us for a quote. Select items can be delivered internationally by prior agreement. Again please contact us for a quote. We will always do our best to help.
Our aim is to dispatch goods within 2 working days of an order being placed. Please allow 5 working days from the time of your order to receipt of item. If an order is expected to take longer than this our order fulfillment department will contact you to inform you of this.
Where multiple items are ordered, we will dispatch them all in one package. If you have ordered any special or customized items, or items otherwise not immediately available, we will dispatch the order when all items are available. If you have any concerns regarding this, please contact us and we will do are very best to help you.