The M-700u power amp is the perfect partner for the C-700u, drawing upon Luxman’s decades of experience in amplifier design to deliver an exquisite combination of rich sonic expression, fine detail, wide bandwidth and dynamic gusto. Stereo output is rated at 120W per channel into eight ohms and 210W per channel into four ohms, achieving up to 840W per channel into one ohm instantaneously. There is also a user-selectable mono mode with a rated output of 420W into eight ohms.
In order to achieve this level of power without sonic compromise, Luxman has implemented its ODNF 4.0 drive circuit utilising a four-parallel push-pull structure with three-stage Darlington. A Luxman ‘Ultimate Efficiency Power Transformer’ – an EI type rated at 550VA – forms the heart of the amp’s power supply, with plentiful regulation ensuring an unshakable response to any load fluctuations. A high-capacity block capacitor contributes to the M-700U’s ability to deliver lashings of power instantaneously yet remain firmly in control, while the amp’s low-impedance transmission design, carefully selected custom components and short, fully optimised signal paths deliver maximum sonic purity
|Rated output||120W + 120W (8Ω)/at stereo
210W + 210W (4Ω)/at stereo
420W (8Ω)/at monaural
|Instantaneous max. output||840W + 840W (1Ω)/at stereo
1,680W (2Ω)/at monaural
|Input sensitivity||1.1V/120W (8Ω)
|Input impedance||Unbalanced 51kΩ
|Frequency response||20Hz to 20kHz (+0, –0.1dB)
1Hz to 130kHz (+0, –3.0 dB)
|Total harmonic distortion rate||0.009% or less (1kHz/8Ω)
0.1% or less (20Hz to 20kHz/8Ω)
|S/N ratio (IHF-A)||115dB|
|Amplification circuit||ODNF 4.0|
|Output configuration||Bipolar 4-parallel push-pull|
|Power transformer||EI type 550VA|
110W (under no signal)
0.4W (at standby)
|External dimensions||440(W) x 190(H) x 427(D) mm
front side knob of 2mm and rear side
terminal of 38 mm included in depth
|Accessories||Dedicated remote cable
|Speaker terminal Supported Y-lug terminal dimension||Width of part a: 14mm or less
Width of part b: 7mm or more
* Connection may not be performed
depending on the shape of the
Nintronics offers generous trade in prices to help make your next upgrade as seamless as possible, while greatly reducing the overall price of your purchase. Depending upon the items involved, Nintronics will be happy to send out one of our nationwide installation engineers to collect your traded in items and unbox, setup and calibrate your new equipment.
We offer FREE delivery to the mainland UK (excluding Channel Islands, Isle of Man, Isle of White, Isles of Scilly, and some of the remote Scottish Isles).
For other areas please contact us for a quote. Select items can be delivered internationally by prior agreement. Again please contact us for a quote. We will always do our best to help.
Our aim is to dispatch goods within 2 working days of an order being placed. Please allow 5 working days from the time of your order to receipt of item. If an order is expected to take longer than this our order fulfillment department will contact you to inform you of this.
Where multiple items are ordered, we will dispatch them all in one package. If you have ordered any special or customized items, or items otherwise not immediately available, we will dispatch the order when all items are available. If you have any concerns regarding this, please contact us and we will do are very best to help you.