The D1100 digital preamplifier is a reference level stereo preamplifier and digital-to-analogue converter (DAC). Its 8-channel, 32-bit DAC is used in Quad Balanced mode with half of it dedicated to the left audio channel and the other half to the right channel. It’s the most advanced DAC we’ve ever used and delivers an unprecedented level of performance so that all your digital music is reproduced with exceptional accuracy and authenticity.
Enough inputs – 9 to be exact – are included to keep even the largest digital system connected as 3 optical, 3 coaxial (2 RCA and 1 BNC), plus 1 each of MCT, AES/EBU and USB inputs are onboard. The USB input accepts up to 32-bit/384kHz signals and supports DSD64, DSD128, DSD256, DXD 352.8kHz and DXD 384kHz playback1. All the other inputs accept up to 24-bit/192kHz. The MCT input is a McIntosh exclusive and allows for enjoying to the high-resolution audio found on SACDs via the MCT450 SACD/CD Transport. Three sets of balanced and unbalanced stereo outputs connect the D1100 to your system. One set of outputs has fixed volume while the other 2 have variable volume; the variable outputs can also be switched on and off for additional user configurability.
The D1100 is designed for ease of use: all inputs can be renamed; its 4 data ports and 4 power control triggers are fully programmable, and it has both IR and RS232 external control. For personal listening, Headphone Crossfeed Director (HXD®) will bring a new depth and spatiality to your music.
The D1100 is a full-featured, fully functional self-contained unit that can be used independently of any other preamplifier. But thanks to McIntosh’s engineering prowess, it can also be connected to and used in tandem with its analogue equivalent, the C1100 Vacuum Tube Preamplifier. Combining the two together with the included umbilical cable creates the definitive analogue and digital stereo preamplifier. When connected, the C1100 takes overall control of the D1100 resulting in a single and easy to use interface. Like the C1100, the D1100’s left and right audio channels and power supplies are electrically isolated from each other to produce true dual mono operation when used either by itself or with the C1100. This isolation delivers absolute stereo separation and sonic purity.
It’s housed in a beautifully polished stainless steel and hairline brushed black Titanium stainless steel chassis – the same as the C1100 so the two will seamlessly blend with each other if used together. A black glass front panel, blue meters, knobs, an illuminated logo and brushed aluminium end caps complete the ageless McIntosh look. It can be paired with a variety of amplifiers, room correction devices, speakers, CD players, streaming audio players and other source components to make a complete home audio system.
1) Please see Downloads tab for required driver that must be installed on Windows based computers (if an Apple based computer is used, no additional driver is required). See Owner’s Manual for driver instructions.
2) The C1100 firmware will need to be updated to its latest version for proper operation with the D1100.
|Total Harmonic Distortion||0.0015% (at 2V Output)|
|Frequency Response||+/-0.5dB from 4Hz to 20,000Hz|
|+0.5/-3dB from 4Hz to 68,000Hz|
|Maximum Volts Out (Balanced / Unbalanced)||16/8 V RMS|
|Input Impedance (Balanced / Unbalanced)||N/A|
|Phono Voltage Gain||N/A|
|High Level Voltage Gain||N/A|
|Signal To Noise Ratio||111dB|
|Dual Mono Power Supply||Yes|
|Dual Mono, Fully Balanced||Yes|
|Phono Input Moving Coil||0|
|Phono Input Moving Magnet||0|
|Digital Coaxial Input||3 (2 RCA and 1 BNC)|
|Digital Optical Input||3|
|Digital MCT (DIN) Input||1|
|Digital USB Input||1 (accepts PCM signals up to 32-bit/384kHz; supports DSD64, DSD128 and DSD256 plus DXD 352.8kHz and DXD 384kHz)|
|Digital AES/EBU Input||1|
|Balanced Fixed Output||1 Stereo|
|Balanced Variable Output||2 Stereo|
|Unbalanced Fixed Output||1 Stereo|
|Unbalanced Variable Output||2 Stereo|
|Headphone Output||1/4" High Drive with Headphone Crossfeed Director (HXD®)|
|Record Processor Loop||No|
|Input Level Match||No|
|Home Theater PassThru||No|
|Unbalanced Analog Connector Type||Premium gold-plated solid brass|
|Tone Bypass and Input Assign||No|
|RS232 Control Input||Yes|
|Power Control Output||4 Trigger|
|Rear Panel Data Port||4|
|Rear Panel IR Sensor Input||Yes|
|Multi-Chassis or Single||Single|
|Vacuum Tube or Solid State||Solid State|
|Power Consumption (On)||30 watts|
|WEIGHTS & DIMENSIONS|
|Dimensions (W x H x D)||17.5" (44.45cm) x 6" (15.24cm) x 19" (48.3cm)|
|Weight||26 lbs (11.8 kg)|
|Shipping Weight||41 lbs (18.6 kg)|
Book a Demo:
McIntosh D1100 Digital Pre-Amplifier
Trade in form:
McIntosh D1100 Digital Pre-Amplifier
Delivery & Returns
We offer FREE delivery to the mainland UK (excluding Channel Islands, Isle of Man, Isle of White, Isles of Scilly, and some of the remote Scottish Isles).
For other areas please contact us for a quote. Select items can be delivered internationally by prior agreement. Again please contact us for a quote. We will always do our best to help.
Our aim is to dispatch goods within 2 working days of an order being placed. Please allow 5 working days from the time of your order to receipt of item. If an order is expected to take longer than this our order fulfillment department will contact you to inform you of this.
Where multiple items are ordered, we will dispatch them all in one package. If you have ordered any special or customized items, or items otherwise not immediately available, we will dispatch the order when all items are available. If you have any concerns regarding this, please contact us and we will do are very best to help you.