McIntosh
McIntosh C22 mk V Valve PreAmplifier
McIntosh C22 mk V Valve PreAmplifier
Couldn't load pickup availability
- Free Delivery
- Demo Available
- Trade-in Available
- 3 year Warranty
Share
Details
Description
This newest version of our C22 Vacuum Tube Preamplifier – the Mk V – is the direct replacement to our highly regarded C70 Limited Edition 70th Anniversary Vacuum Tube Preamplifier, which commemorated our 70th Anniversary that took place in 2019. The new C22 Mk V is the latest McIntosh vacuum tube preamplifier to carry the cherished C22 model number. It has all the performance of the acclaimed C70 but with the hallowed C22 moniker and its signature glass and aluminum front panel design.
The C22 Mk V uses one 12AT7 and five 12AX7A vacuum tubes which can be seen through a glass panel located on the top of the preamp. Knobs and rocker switches operate all control functions while modern LED lights indicate input selection and volume level. The C22 Mk V has two balanced inputs, three unbalanced inputs, one Moving Coil and one Moving Magnet phono inputs, for a total of seven inputs. There are two pairs each of balanced and unbalanced output connections; the two outputs allow sending signals to two separate power amplifiers.
Bypassable bass and treble tone controls are located on the front panel and can be adjusted in 2dB increments via rotary knobs. Impedance and capacitance for the phono inputs can also be adjusted via separate rotary knobs. In addition to setting the listening level, the volume knob can also be used to adjust the relative volume balance between the left and right audio channels. The ¼” headphone jack is powered by our High Drive headphone amplifier and features our Headphone Crossfeed Director (HXD®) technology. HXD improves the sound localization for headphone listening by restoring the directionality component of the sound stage that's normally only heard from loudspeakers.
Specifications
Specifications
| ELECTRONIC SPECIFICATIONS | |
| Number of Channels | 2 |
| Total Harmonic Distortion | 0.08% |
| Frequency Response | +0, -0.5dB from 20Hz to 20kHz |
| +0, -3dB from 15Hz to 100kHz | |
| Maximum Volts Out (Balanced / Unbalanced) | 16V RMS / 8V RMS |
| Sensitivity High Level (Balanced / Unbalanced) | 900mV / 450mV |
| Sensitivity Phono (Moving Coil) | 0.45mV |
| Sensitivity Phono (Moving Magnet) | 4.5mV |
| Signal To Noise Ratio (High Level) | 100dB |
| Signal To Noise Ratio (Moving Coil) | 75dB |
| Signal To Noise Ratio (Moving Magnet) | 75dB |
| Voltage Gain (High Level) | 15dB |
| Voltage Gain (Moving Coil) | 60dB |
| Voltage Gain (Moving Magnet) | 40dB |
| Input Impedance (Balanced / Unbalanced) | 44K ohm, 22K ohm |
| CONNECTIVITY | |
| Balanced Input | 2 |
| Unbalanced Input | 3 |
| Phono Input Moving Coil | 1 (adjustable) |
| Phono Input Moving Magnet | 1 (adjustable) |
| Upgradeable Digital Audio Module | No |
| Digital Coaxial Input | 0 |
| Digital Optical Input | 0 |
| Digital MCT (DIN) Input | 0 |
| Digital USB Input | 0 |
| HDMI (ARC) Input | 0 |
| Digital AES/EBU Input | 0 |
| Balanced Fixed Output | 0 |
| Balanced Variable Output | 2 |
| Unbalanced Fixed Output | 0 |
| Unbalanced Variable Output | 2 |
| Headphone Output | 1/4" High Drive with Headphone Crossfeed Director (HXD®) |
| Input Level Match | No |
| Home Theater PassThru | No |
| Unbalanced Analog Connector Type | Premium gold-plated solid brass |
| Service Port | 0 |
| CONTROL | |
| Tone Controls | Bass and Treble |
| Tone Bypass and Input Assign | Tone Bypass: Yes |
| Input Assign: No | |
| RS232 Control Input | No |
| Power Control Output | 2 Main, 2 Switched |
| Rear Panel Data Port | 5 |
| Rear Panel IR Sensor Input | Yes |
| GENERAL SPECIFICATIONS | |
| Multi-Chassis or Single | Single, two layer |
| Output Meters | No |
| Vacuum Tube or Solid State | Vacuum Tube: (5) 12AX7A and (1) 12AT7 |
| Power Consumption (On) | 50 Watts |
| WEIGHTS & DIMENSIONS | |
| Unit Dimensions (W x H x D) | 17.5" (44.45cm) x 6" (15.24cm) x 18" (45.72cm) |
| Unit Weight | 25 lbs (11.3kg) |
| Shipping Weight | 41.4 lbs (18.8kg) |
Book a Demo
Book a Demo:
McIntosh C22 mk V Valve PreAmplifier
Trade in
Trade in form:
McIntosh C22 mk V Valve PreAmplifier
Reviews
Reviews
Delivery & Returns
Delivery & Returns
We offer FREE delivery to the mainland UK (excluding Channel Islands, Isle of Man, Isle of White, Isles of Scilly, and some of the remote Scottish Isles).
For other areas please contact us for a quote. Select items can be delivered internationally by prior agreement. Again please contact us for a quote. We will always do our best to help.
Our aim is to dispatch goods within 2 working days of an order being placed. Please allow 5 working days from the time of your order to receipt of item. If an order is expected to take longer than this our order fulfillment department will contact you to inform you of this.
Where multiple items are ordered, we will dispatch them all in one package. If you have ordered any special or customized items, or items otherwise not immediately available, we will dispatch the order when all items are available. If you have any concerns regarding this, please contact us and we will do are very best to help you.
