Skip to product information
1 of 7


Technics SU-G700M2 Grand Class Stereo Integrated Amplifier

Technics SU-G700M2 Grand Class Stereo Integrated Amplifier

Regular price £2,499.99
Regular price Sale price £2,499.99
Sale Sold out
    View full details



    Grand Class Amplifier

    Stereo Integrated Amplifier SU-G700M2


    JENO Engine
    (Jitter Elimination and Noise-shaping Optimization)

    In order to faithfully transmit the massive amount of audio data sent to the speakers without loss, the SU-G700M2 power amp section uses full digital amplification employing the JENO Engine, based on the design concept of reference systems. In order to solve the issue of sound quality degradation due to jitter, which poses problems for conventional digital amplifiers, the SU-G700M2 has an original jitter reduction circuit that eliminates jitter over the entire audible frequency range. Also, a unique, high-precision PWM (Pulse Width Modulation) conversion circuit is used for PWM conversion, which is important for sound quality. By optimising items such as the noise-shaping speed, degree, and quantization number through our unique expertise, data even in the wide dynamic range contained in high-resolution sound sources is converted to PWM signals without loss. These technologies provide reproduction of natural and finely detailed sound, enabling perception even of delicate music nuances.

    (Load Adaptive Phase Calibration)

    Speaker impedance changes with each frequency and a power amplifier is required to drive speakers without being affected by the speaker’s characteristics. However, conventional digital amplifiers are connected to speakers through a low-pass filter at the output stage, so they are even more strongly affected by the speaker impedance characteristics. Also, although the amplitude characteristics of conventional amplifiers due to negative feedback were improved, the phase characteristics could not be enhanced. We thus developed a speaker impedance adaptive optimisation algorithm that performs correction to the ideal impulse response through digital signal processing by measuring the frequency amplitude-phase characteristics of the amplifier with the speakers connected. This new technique enables flattening the frequency characteristics of amplitude and phase, which had previously not been achieved by amplifiers, as well as delivering a sound with rich spatial expression.

    Advanced Speed Silent Power Supply

    The power supply technology incorporated in the reference-class model SU-R1000 has been employed for improved speaker drive power and a greater feel of energy. The switching frequency has been increased from the conventional 100kHz band to the 400kHz band to ensure stable supply of voltage and current and to reduce adverse effects of modulation noise on the audio quality. The device is equipped with the same GaN FET and SiC SBD as those mounted in the SU-R1000 to deliver maximum performance from the high-speed switching power supply system.
    What’s more, a Super Low Noise Regulator is provided in the later stage. It prevents the decrease of regulation due to fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a low-noise and high-response power supply that maximises the performance of the digital amplifier.

    Three-section Configuration

    In integrated amplifiers there are a variety of circuits, including circuits that handle the micro-signals of inputs and those that handle a large current, such as output circuits and power-supply circuits. The SU-G700M2 uses a three-section construction with partitions installed between the circuit blocks according to the signal level handled. This eliminates interference between circuit blocks, thus achieving clear sound quality. In addition to the three-section construction, the SU-G700M2 comes with a bottom chassis featuring a two-layer construction with 1.2-mm-thick and 2-mm-thick steel plates, a top panel made of a 1.6-mm-thick steel plate and a 7-mm-thick aluminium front panel for improved vibration damping.

    Low-noise PHONO Input

    PHONO MC input is now supported. The PHONO input achieves low noise by using a differential parallel connection configuration of a first-stage, low-noise FET. In addition, four-level gain adjustment enables selection of the best gain according to the cartridge output. This enables optimal playback of high-grade analogue recorded sound sources tailored to the user’s environment.

    Class AA Headphone Amplifier

    The SU-G700M2 uses a Class AA headphone amplifier with separate amplifier circuits for voltage amplification and current amplification of the audio signal. The voltage is amplified by a high-grade operational amplifier, the current is amplified by an operational amplifier with high current-supply capability, and the high-grade PWM signal output from the JENO Engine is converted to analogue with high precision, thus enabling headphones to be ideally driven. This makes it possible to reproduce music with low distortion and a wide frequency range no matter what the load impedance of the headphones is.

    Technics’ exclusive block capacitor

    The power supply unit for the amplifier features Technics’ exclusive block electrolytic capacitor optimised through scrupulous tuning, which was installed in the SU-R1000.

    Large ground terminal

    The large ground terminal accommodates a thick, large-diameter ground wire.

    Brass speaker terminals

    The screws used for securing the wires sending audio signals to the speaker terminals are made of nonmagnetic brass.

    JENO Engine (Jitter Elimination and Noise-shaping Optimization)

    LAPC (Load Adaptive Phase Calibration)

    Advanced Speed Silent Power Supply

    Three-section Configuration

    Low-noise PHONO Input

    Class AA Headphone Amplifier


    Output Power

    • 70W + 70W ( 1kHz, T.H.D. 0.5 %, 8Ω, 20kHz LPF )
      140W + 140W ( 1kHz, T.H.D. 0.5 %, 4Ω, 20kHz LPF )

    Load Impedance

    • 4Ω-16Ω

    Frequency Response

    • PHONO (MM)

      • 20Hz - 20kHz ( RIAA DEVIATION ±1dB, 8Ω )
    • PHONO (MC)

      • 20Hz - 20kHz ( RIAA DEVIATION ±1dB, 8Ω )
    • LINE

      • 5Hz - 80kHz ( -3dB, 8Ω )

      • 5Hz - 80kHz ( -3dB, 8Ω )

    Input Sensitivity / Input Impedance

    • PHONO (MM)

      • 2.5 mV / 47 kΩ
    • PHONO (MC)

      • 300 uV /100 Ω
    • LINE

      • 200 mV / 22 kΩ

    Analogue Input Terminal

    • LINE x 2 (LINE1, LINE2 / MAIN IN)
      PHONO (MM/MC) x1

    Digital Input Terminal

    • Optical digital x2 (OPT 1, OPT 2)
      Coaxial digital x2 (COAX 1, COAX 2)
      USB-B x1 (PC)

    Analogue Output Terminal

    • LINE OUT x1 (LINE OUT)
      PRE OUT x1 (PRE OUT)

    Headphone Output

    • Yes, Stereo Φ6.3 mm


    • USB 2.0 high-speed
      USB Audio Class 2.0, Asynchronous mode

    Support Codec

    • PCM Yes (32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz / 16, 24, 32 bit)
      DSD Yes (2.8 MHz, 5.6 MHz, 11.2 MHz)

    DSD contol mode

    • ASIO Native mode, DoP mode

    Power Supply

    • AC 220 V - 240 V, 50/60 Hz

    Power Consumption

    • 95W

    Dimensions (W x H x D)

    • 430 mm × 148 mm × 428 mm


    • Approx. 12.6 kg


    • AC Cord, Remote Control, Batteries for Remote Control, Owner's Manual




    Book a Demo

    Book a Demo:

    Technics SU-G700M2 Grand Class Stereo Integrated Amplifier
    Technics SU-G700M2 Grand Class Stereo Integrated Amplifier

    Trade in

    Trade in form:

    Technics SU-G700M2 Grand Class Stereo Integrated Amplifier
    Technics SU-G700M2 Grand Class Stereo Integrated Amplifier



    Delivery & Returns

    Delivery & Returns

    We offer FREE delivery to the mainland UK (excluding Channel Islands, Isle of Man, Isle of White, Isles of Scilly, and some of the remote Scottish Isles).

    For other areas please contact us for a quote. Select items can be delivered internationally by prior agreement. Again please contact us for a quote. We will always do our best to help.

    Our aim is to dispatch goods within 2 working days of an order being placed. Please allow 5 working days from the time of your order to receipt of item. If an order is expected to take longer than this our order fulfillment department will contact you to inform you of this.

    Where multiple items are ordered, we will dispatch them all in one package. If you have ordered any special or customized items, or items otherwise not immediately available, we will dispatch the order when all items are available. If you have any concerns regarding this, please contact us and we will do are very best to help you.